[Bioconversion] Online Briquetting Book

[Jeff Davis]

Dear AJH and list,

AJH wrote:
> I would be interested in your stories about the one you worked with. I have
> little practical knowledge but did see that the GBP80k cost of a pelletter
> rose to ten times that for a full factory and that was only rated at 15k
> tonnes/annum!

Not much of a story. I worked in a chip board furnature plant, repairing 
electronic automation equipment. All the waste was ran through the pelleter. 
I might have some pictures of it. It was a big machine. Did a vary good job. 
Nice machine as long as I didn't have to pay for it. I'm sure if one was 
doing a large volume, it would pay for it's self. The waste wood first was 
hogged than put through the pelleter. Of course sawdust went straight in.
-- 

Jeff Davis