[Gasification] Gasification of sawdust
Jeff Davis
jeff0124 at velocity.net
Wed Aug 16 00:34:30 CDT 2006
Hi Aaron,
On Tuesday 15 August 2006 09:31 am, Gm Parts Source wrote:
> I have looked into the pelleting but what I
> found was that the sawdust needed to be at a specific moisture content is
> this true?
There is a window but I do not recall what it is.
> I am interested into looking into this more. One of the other
> things that I have an abundance in addition to the sawdust is bark and very
> course sawdust. It would be great to be able to use that to make gas as
> well
Not sure about the bark but the course sawdust should be OK.
> Do you know of any good online resources where I can study the
> pelleting process and the working pressures needed to get the sawdust to
> stay pelleted?
In the "Technology Packages: Screw-press briquetting machines and
briquette-fired stoves" it says about 320 deg C, that's for rice hulls. They
have on line books on making these machines. I do not have the URL in front
of me but some key names to google are, Bhattacharya, Asian Institute of
Technology, technology packages, RERIC. One of the book ISBN numbers is
974-8202-976
**************
In regards to agglomerations:
Right now my main interest is in hydrogen bonding.
You might want to check out my outdated web page at the below link:
http://www.velocity.net/~jeff0124
If you go to the below link and look for fuel then look for fireballs you can
read somemore.
http://www.bioenergylists.org/
High density pellets make great fuel and if you need to transport your fuel it
is the way to go. But I like to think about biomass as the common (ground) on
an electronic PB board and the transistors and IC's are like coal and oil. So
if possible use biomass at or close to the point of use and now a low density
agglomeration starts to make some sense. In other words, people like to apply
old oil/coal thinking to biomass. Oil/coal has to be transported because it
is not common, it is found at remote locations and needs to be transported.
There are lots of odd biomass fuels that are under our noses that we can use.
We need to unify these odd fuels. That is my hope for the fireball.
Best wishes,
Jeff
--
Jeff Davis
Somewhere 20 miles south of Lake Erie, USA
http://www.velocity.net/~jeff0124
More information about the Gasification
mailing list