[Gasification] Chinese Gasifier drawing (from their patent papers)

[Tom Miles]

Peter,

You can send the pictures to me and I'll put them on the gasification
website at http://gasifiers.bioenergylists.org

Tom
 

-----Original Message-----
From: gasification-bounces at listserv.repp.org
[mailto:gasification-bounces at listserv.repp.org] On Behalf Of Peter Singfield
Sent: Saturday, November 11, 2006 1:50 PM
To: gasification at listserv.repp.org
Subject: [Gasification] Chinese Gasifier drawing (from their patent papers)


OK -- made it as small as I could -- hope it gets through??

Your looking at their patent drawing ---

The taper and throat is basically as the way it still is -- but add the 18
inches of refractory lined straight walled cylinder (about 16 INCHES ID) on
top -- which I call the extra fuel storage area.

Make the top hatch bigger (10 inches)

The bottom ash pit door (to the right) is 6 inches now.

The gas outlet is same place -- but 4 in diameter now.

The gasifier comes with a 1/4 thick iron cover -- and a 1 inch pipe with all
metal ball valve to the side of hatch on top to control air flow in.

Peter