[Strawbale] paint on outside in side of stucco
Patrick Hearn
pathearn at sasktel.net
Tue Jul 11 07:57:03 CDT 2006
This is the formula that I used. I have found that the scratch coat
cracked but that was all until the finish coat. I have some
shrinkage cracks in the colour coat. I don't know anything about
painting I used Imasco dyes for the colour and it worked great. Also
Divit makes a stucco paint that is vapor permeable.
Flaxstraw
On 10-Jul-06, at 10:13 AM, Scott Hall wrote:
> We will be stuccoing soon. 2 coats will be sprayed on inside and
> outside. Our formula will be:
>
> 1 part lime
> 1 part portland
> 5 parts sand
>
>
> I will be using silicote paint on the outside of the house because
> it is
> a breathable paint. Should I or can i also use this on the
> inside? I
> have been advised that regular latex paint is fine on the inside
> because
> it will keep water vapor from going from the inside out through the
> walls and that the breathability aspect applies only to the outside of
> the structure. Any suggestions/ feedback?
>
> Thanks,
>
> Scott
> _______________________________________________
> Strawbale mailing list
> Strawbale at listserv.repp.org
> http://listserv.repp.org/mailman/listinfo/strawbale_listserv.repp.org
More information about the Strawbale
mailing list