[Strawbale] (not) Re: Blower Door test set-up

[Dion Hollenbeck]

At 10:03 AM 4/11/2007, Rob Tom wrote:
>I'm wondering if this thread is wandering into the realm of the arcane and
>is of limited interest to the point where people's eyes glaze over and
>then skip over the postings ?

It has for me.  B-}  All I need to know on my workshop building is 
that when I close the person door, the air being sucked under the 
roll-up door causes it to squeak.  In my mind, that means that my 
building is quite tight.  And, when temps outside were in the high 
30's in the day, and in the teens at night, without any heat 
whatsoever, the workshop only lost 4 degrees from 70F to 66F in 24 
hours.  I would have to say that I have done my job in making a nice 
tight building envelope.  And that is as technical as I want to 
get.  However, as per usual, I may be out on the fringe, rather than 
being mainstream.  And when talking about SB constuction, that puts 
me on the fringe of the fringe.  B-}

But, all in all, if people are still interested in the discussion, it 
ought to go on.  After all, we all have a delete key and it *is* on topic.

regards,
dion

--
Dion Hollenbeck
Email: hollen at woodsprite.com    Home Page: http://www.woodsprite.com
Brewing Page: http://hbd.org/hollen   Toys: 98 4Runner, 86 4x4 PU