[Strawbale] Wood Peckers & Strawbale

[Dion Hollenbeck]

At 12:21 PM 1/3/2007, Dot Rhodes wrote:
>My plan is to enclose the eaves with Hardy cement
>board soffit and either replace or cover the fascia with Hardy fascia.

On my workshop, I used HardiBoard as soffits, but did not know about 
Hardi Fascia.  I covered my fascia in custom bent aluminum gutter 
material over standard 2"x8" fascia boards.  If Hardi Fascia is 
available, it might save me a lot of money in the long run when I 
build the house.  I just looked at their website, and they do make 
it, listed under HardiTrim Planks.  The soffit material is *much* 
cooler that what I used, which was just the flat board.  The built in 
venting will save me lots of work.

Thanks for this idea.  It will save me a lot of work and money.

dion

--
Dion Hollenbeck
Email: hollen at woodsprite.com    Home Page: http://www.woodsprite.com
Brewing Page: http://hbd.org/hollen   Toys: 98 4Runner, 86 4x4 PU